Viking Dishwasher Fault Codes: A Comprehensive Guide
If your Viking dishwasher has suddenly stopped working and is flashing an error code, don’t panic! These fault codes are built-in troubleshooting tools designed to help identify the issue. Some problems can be fixed with a simple check, while others may require professional repair. In this guide, we will cover all the common Viking dishwasher error codes and what they mean.
Understanding Viking Dishwasher Error Codes
Viking dishwashers are equipped with self-diagnostic systems that alert users when something goes wrong. Each error code corresponds to a specific issue. Let’s break them down:
Viking Dishwasher Error Codes
| Error Code | Description | Possible Causes | How to Fix |
|---|---|---|---|
| 1 | Water Inlet Issues | Water supply valve closed, kinked hose, faulty inlet valve | Check valve, inspect hose, replace valve if necessary |
| 2 | Drainage Problems | Clogged drain hose, blocked garbage disposal, faulty drain pump | Check hose, run disposal, replace pump if needed |
| 3 | Overheating Error | Faulty heating element, defective thermostat, bad control board | Unplug dishwasher, call a technician |
| 4 | Door Latch Malfunction | Blocked door, broken latch or sensor | Ensure door closes properly, replace latch if broken |
| 5 | Power Supply Errors | Unplugged dishwasher, tripped breaker, faulty power cord | Check plug, reset breaker, replace cord if damaged |
| 6 | Control Panel Malfunctions | Broken touch panel, loose connection, defective board | Reset dishwasher, replace panel if issue persists |
| 7 | Temperature Sensor Faults | Faulty temperature sensor | Replace sensor (technician required) |
| 8 | Water Level Too Low | Clogged water line, bad inlet valve, faulty float switch | Check inlet valve, inspect lines, replace float switch |
| 9 | Heating Element Failures | Burnt-out heating element | Test with multimeter, replace if defective |
| 10 | Communication Errors | Damaged control board, faulty wiring | Technician diagnosis required |
Error Code 1: Water Inlet Issues
What it means: The dishwasher is not getting enough water. Possible causes:
- The water supply valve is closed.
- The water hose is kinked or blocked.
- The water inlet valve is faulty. How to fix:
- Ensure the water supply valve is fully open.
- Inspect the water supply hose for kinks or blockages.
- If the issue persists, the water inlet valve may need replacement.
Error Code 2: Drainage Problems
What it means: The dishwasher is not draining properly. Possible causes:
- A clogged drain hose.
- A blocked garbage disposal (if connected).
- A malfunctioning drain pump. How to fix:
- Check the drain hose for kinks or clogs.
- Run the garbage disposal to ensure it’s clear.
- If the problem continues, the drain pump might need replacement.
Error Code 3: Overheating Error
What it means: The dishwasher is overheating. Possible causes:
- A faulty heating element.
- A defective thermostat.
- A malfunctioning control board. How to fix:
- Turn off and unplug the dishwasher immediately.
- Call a professional to diagnose and repair the issue.
Error Code 4: Door Latch Malfunction
What it means: The door is not closing properly. Possible causes:
- Dishes or utensils blocking the door.
- A broken latch or door sensor. How to fix:
- Ensure the door is fully closed and latched.
- Inspect the latch for visible damage; if faulty, replace it.
Error Code 5: Power Supply Errors
What it means: There’s an issue with the dishwasher’s power supply. Possible causes:
- The dishwasher is unplugged.
- The circuit breaker has tripped.
- The power cord is faulty. How to fix:
- Ensure the dishwasher is properly plugged in.
- Check and reset the circuit breaker.
- If the power cord appears damaged, consult a professional.
Error Code 6: Control Panel Malfunctions
What it means: The control panel is not responding. Possible causes:
- A broken touch panel.
- A loose internal connection.
- A defective control board. How to fix:
- Try resetting the dishwasher by turning off the circuit breaker for a few minutes.
- If the issue persists, a technician may need to replace the control panel.
Error Code 7: Temperature Sensor Faults
What it means: The dishwasher’s temperature readings are incorrect. Possible causes:
- A faulty temperature sensor. How to fix:
- The sensor likely needs replacement, which should be done by a technician.
Error Code 8: Water Level Too Low
What it means: The dishwasher is not getting enough water to complete its cycle. Possible causes:
- A clogged water line.
- A malfunctioning water inlet valve.
- A stuck or broken float switch. How to fix:
- Check the water inlet valve and ensure it’s functioning properly.
- Inspect the water lines for blockages.
- If the float switch is faulty, seek professional assistance.
Error Code 9: Heating Element Failures
What it means: The heating element is not working, affecting wash and dry performance. Possible causes:
- A burnt-out heating element. How to fix:
- Use a multimeter to check for continuity.
- If defective, the heating element will need to be replaced.
Error Code 10: Communication Errors Between Components
What it means: Internal components are not communicating properly. Possible causes:
- A damaged control board.
- Faulty wiring connections. How to fix:
- A technician will need to diagnose and fix the issue using specialized tools.
Additional Viking Dishwasher Error Codes Based on Flashing Lights
Some Viking models use indicator lights to signal errors:
- “Heavy” (pot icon) flashes – Too much water in the dishwasher. Contact service.
- “Light china” (wine glass icon) flashes – Water inlet issue. Ensure the valve is open.
- “Quick” (wine glass with arrows) flashes – Valve leakage. Contact service.
- “Pots/Pans” (pot with underline) and “Heavy” (pot) flash together – Blocked drain. Clean filters and check for obstructions.
When to Call a Professional
While some issues can be resolved with simple troubleshooting, others require expert attention. If you are unable to fix the problem yourself, reach out to a qualified Viking dishwasher repair technician. Having your dishwasher’s model number and error code handy can help speed up the repair process.
Final Thoughts
Viking dishwashers are designed to be reliable, but like all appliances, they can experience occasional faults. Understanding error codes can save you time and effort by pointing you to the root cause of the problem. We hope this guide helps you troubleshoot your Viking dishwasher effectively. If you need further assistance, don’t hesitate to seek professional repair services!