How to Fix LG Dishwasher Error Code NE
Nothing throws off your kitchen groove more than your dishwasher hitting you with an error code. If your LG dishwasher flashes the dreaded NE code, don’t worry you’re not alone, and it’s totally fixable! But what does it mean, and how can you get your dishwasher back to business? We’ve got you covered with this straightforward guide.
What Does the LG Dishwasher NE Error Code Mean?
The NE error code on your LG dishwasher stands for “No Error” with a bit of bitter irony because clearly, there’s an issue! Jokes aside, it actually indicates a problem with the dishwasher’s Vario motor. This motor is essentially the component that controls the spray arms, helping them spin and clean your dishes effectively. When something misfires and the motor can’t do its job, the NE code pops up to alert you.
Here’s what might be causing it:
- A disconnected or damaged wiring harness to the motor
- A faulty Vario motor
- Obstructions or jams in the spray arms
Step-by-Step Guide to Fix the NE Error Code
Before you grab your toolbox or call a professional, check through these steps to troubleshoot and resolve the issue.
Step 1: Reset Your Dishwasher
Sometimes all your dishwasher needs is a simple reset. Tech works in funny ways, right?
- Turn off your dishwasher and unplug it from the power source (or switch off the circuit breaker).
- Wait for about 10 minutes to allow the system to discharge completely.
- Plug the dishwasher back in and restart it.
If the error disappears, congrats it was just a glitch! However, if the NE code is still there, move on to step 2.
Step 2: Inspect the Spray Arms
The spray arms are crucial for even water distribution. A blockage here can halt the motor’s movement.
- Remove the spray arms carefully.
- Check for food particles, debris, or anything else that might be obstructing the arms. Some sneaky bits of rice or chunks of pasta can be the culprits.
- Clean them thoroughly and reinstall.
Test the dishwasher. If it’s back in action high-five! If not, proceed to the next step.
Step 3: Check the Wiring
Loose or damaged connections to the Vario motor can trigger the NE error.
- Unplug the dishwasher.
- Open the dishwasher panel (you might need a screwdriver for this step check the user manual for guidance).
- Locate the wiring harness that connects to the Vario motor. Ensure it’s securely in place and not damaged.
- If you spot any loose wires, reconnect them. If wires are broken or frayed, you may need to replace them. (Be cautious if you’re not comfortable working with wiring better call a pro!)
Step 4: Inspect the Vario Motor
If everything else checks out, it’s time to turn your attention to the Vario motor.
- Locate the Vario motor inside your dishwasher. The user manual can help you with the exact location.
- Check for signs of wear, damage, or failure.
- If the motor seems faulty, it will likely need replacing. Replacement motors can typically be purchased online or from an LG service center.
This step might require you to take out the motor entirely and swap it for a new one. If you’re not a DIY expert, it’s a good idea to contact an authorized repair technician for help.
Step 5: Call for Professional Help
If you’ve cleaned everything, tightened wires, inspected the motor, and the NE error still refuses to go away, it’s time to get help from an LG-certified repair service. They’ll have the expertise to dig deeper into the issue and get your dishwasher running like new.
Preventing the NE Error in the Future
Here are some tips to reduce the chances of encountering this code again:
- Keep your dishwasher clean: Regularly check and clean the filter, spray arms, and nozzles to prevent blockages.
- Load dishes properly: Overloading or improper loading can block the spray arms, putting strain on the motor.
- Be cautious with wiring: When moving or installing your dishwasher, ensure the wires stay secure and undamaged.
- Regular servicing: Schedule periodic maintenance for your dishwasher to keep all components in good condition.
Final Thoughts
The NE error code on your LG dishwasher may seem daunting, but with a bit of patience and troubleshooting, you can likely fix most issues yourself. From resetting the appliance to inspecting the motor, these steps should cover everything you need to know.
And hey, if all else fails, don’t hesitate to get a professional to take a look. After all, life’s too short to hand wash dishes. Happy fixing and even happier dishwashing!