Indesit Dishwasher Error Codes

If your Indesit dishwasher is displaying an error code, don’t worry. These codes are designed to help you identify and fix issues quickly. Below is a comprehensive guide to the most common Indesit dishwasher error codes and their meanings, along with actionable steps to resolve them.

Common Indesit Dishwasher Error Codes

Common Indesit Dishwasher Error Codes

Error Code Description Possible Solution Flashing LED Pattern Solution for Flashing LED Pattern
F01 Anti-flooding overflow Check for leaks and inspect the base of the dishwasher for water. 1 LED flashing Turn off the water supply and unplug the dishwasher. Inspect for leaks and dry out the base.
F02 Water fill solenoid valve failure Ensure water supply is on and inspect the inlet valve for blockages. 2 LEDs flashing Check if the water valve is clogged and ensure the water supply is properly connected.
F03 Water drain failure/timeout Check the drain hose, filter, and pump for blockages. 3 LEDs flashing Inspect and clean the drain hose, pump, and filter to ensure water is draining properly.
F04 Thermostat fault Test the thermostat and replace if necessary. 4 LEDs flashing Ensure the heating element is functional and replace the thermostat if needed.
F06 Water fill timeout Ensure the water supply is working and hoses are not kinked. 5 LEDs flashing Check for water pressure issues and inspect the inlet valve for blockages.
F07 Water turbine damaged Inspect the turbine and replace it if damaged. 6 LEDs flashing Replace the water turbine if it’s broken to ensure accurate water flow measurement.
F08 Temperature timeout fault Check heating components and thermostat. 7 LEDs flashing Inspect and possibly replace the heating element or thermostat.
F09 Software error Reset the dishwasher; if the issue persists, seek professional help. 8 LEDs flashing Perform a reset by unplugging the dishwasher for a few minutes.
F10 Heating element fault Inspect the heating element and replace it if faulty. 9 LEDs flashing Check the heating element for damage and replace it if needed.
F11 Wash pump failure Check if the wash pump is running; replace if necessary. 10 LEDs flashing Ensure the wash pump is operational; if not, replace it.
F12 Main board & Display communication error Check wiring connections; a faulty control board may need replacement. 11 LEDs flashing Check wiring between the display and main control board; replace faulty parts.

Important Notes

  • Refer to your manual for specific LED flash codes.
  • Count the flashes and pauses to accurately diagnose the issue.
  • Try a reset before seeking repairs.

Tips to Prevent Future Errors:

  • Clean your dishwasher filter regularly.
  • Avoid overloading the dishwasher, as this can restrict spray arm movement.
  • Use the correct detergent and avoid excessive amounts to prevent clogs.
  • Check hoses and seals periodically for wear or leaks.
  • Follow the manufacturer’s maintenance recommendations.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top