Encountering an error code on your Electrolux dishwasher can feel frustrating, but don’t worry you’re not alone. These codes are designed to help you identify and resolve potential issues quickly. Below, we’ve provided a clear guide to common Electrolux dishwasher error codes, along with practical steps to troubleshoot and fix them.
Electrolux Dishwasher Error Codes & Troubleshooting
| Error Code | Meaning | DIY Fix | Possible Parts |
|---|---|---|---|
| Water & Leak Issues | |||
| i10 | Not enough water entering the dishwasher | • Ensure water supply is turned on • Check inlet hose for kinks/blockages • Clean water inlet filter | Water inlet valve |
| i20 | Dishwasher not draining properly | • Check drain hose for clogs/kinks • Clean dishwasher filter and drain pump | Drain hose, filter, drain pump |
| i30 | Water leakage detected in base | • Check hoses for leaks • Dry dishwasher base • Ensure dishwasher is level | Seals, hoses |
| Er-01 | Sensor detected water leak | • Shut off power • Inspect hoses, pumps, tub for leaks • Replace leaking parts | Drain hose, drain pump, recirculation pump |
| Sensor & Heating Issues | |||
| i60 | Water not heating properly | • Check water heater element • Ensure temperature sensor is functioning | Heating element, temperature sensor |
| i70 | Temperature sensor malfunction | • Check sensor wiring connections • Replace sensor if faulty | Temperature sensor |
| Er-02 | Thermistor/turbidity sensor failure | • Check sensor connections • Replace thermistor if faulty | Thermistor |
| Motor & Pump Issues | |||
| i50 | Drain or circulation pump failure | • Reset dishwasher • Replace if pump makes strange noises | Drain pump, circulation pump |
| Er-03 | Wash motor failure | • Check wiring connections • Replace wash motor if needed | Wash motor |
| Er-07/Er-11 | Drain valve failure | • Inspect drain valve for blockages • Replace if defective | Drain valve |
| Er-12 | Drain valve position error | • Reset dishwasher • Check if drain valve is obstructed/broken | Drain valve |
| Fan & Vent Issues | |||
| Er-04/Er-05 | Upper fan/vent failure | • Inspect fan for blockages • Replace fan if necessary | Upper ventilation fan |
| Er-06 | Lower fan failure | • Check fan wiring • Replace fan if needed | Lower ventilation fan |
| Control & Communication Errors | |||
| i80 | Control board communication failure | • Reset dishwasher • Replace control board if issue persists | Main control board |
| Er-08 | User interface control failure | • Reset dishwasher • Replace user interface control | User interface control |
| Er-09 | Communication failure between UI and control board | • Check wiring between control board and UI • Reset dishwasher • Replace faulty control board | Control board, UI wiring |
| Er-10 | Electronic control board relay failure | • Reset dishwasher • Replace control board if problem persists | Control board |
| Er-13 | Electronic control board failure | • Reset dishwasher • Replace control board if problem persists | Main control board |
General Troubleshooting Steps
- Reset the Dishwasher: Unplug for 10-15 minutes and restart
- Check Filters & Hoses: Clean clogs in water inlet/drain system
- Inspect Wiring & Connections: Ensure no loose/damaged wires
- Call a Technician: If error persists, seek professional service