If your Blomberg dishwasher is showing an error code, it’s trying to tell you something! These error messages are designed to help you identify potential issues and get your dishwasher back in working order. Below is a guide to help you decode these error messages and take the right action.
Blomberg Dishwasher Error Codes (Examples – NOT exhaustive)
| Error Category | Possible Issues | Example Code Formats |
|---|---|---|
| Water Inlet Problems | No water filling, slow filling, overfilling, inlet valve malfunction, low water pressure, blocked inlet hose/filter. | E01, i10, F1, or “Fill Error” / “Water Supply” |
| Drainage Issues | Water not draining, slow draining, blocked drain hose/filter/pump, kinked drain hose. | E02, d10, F2, or “Drain Error” / “Pump Blocked” |
| Washing/Circulation Problems | Wash pump not operating, spray arms not rotating, blocked spray nozzles, wash motor issues. | E03, c10, F3, or “Wash Motor Fault” / “Circulation Problem” |
| Heating Problems | No heating, overheating, faulty heating element, thermostat/sensor issues. | E04, F4, h10, or “Heating Error” / “Temperature Sensor” |
| Sensor Errors | Temperature sensor malfunction, water level sensor fault, other sensor issues. | E05, F5, s10, or “Sensor Fault” / “Level Sensor” |
| Electrical/Electronic Issues | Control board fault, wiring problems, power supply issues. | E06, F6, e10, or “Control Board Error” / “Power Supply” |
| Door/Lock Problems | Door not locking, door not opening, door switch fault. | E07, F7, L10, or “Door Lock Error” / “Door Open” |
| Other/Unclassified Errors | Various issues not fitting above categories. | E99 or general “Fault” indicator |
Key Reminders:
- Consult Your Manual: Your Blomberg dishwasher’s user manual is the most reliable source for your specific model.
- Contact Blomberg: If your manual doesn’t list the error or you can’t resolve it, contacting Blomberg directly is the best way to get accurate information.
- Qualified Technician: For complex issues (heating, motors, electronics), it’s best to call a qualified appliance repair technician.
- Safety: Always disconnect power before troubleshooting.
Note: These are example codes and categories. For precise error codes, always refer to your manual or Blomberg support.
Additional Tips for Troubleshooting Your Blomberg Dishwasher
- Resetting the Dishwasher: Sometimes, simply resetting your dishwasher can clear an error code. Turn off the dishwasher, wait a few minutes, and then turn it back on.
- Regular Maintenance: Keep the filters, spray arms, and interior clean to avoid errors caused by blockages or debris buildup.
- Professional Help: If you’re unsure or unable to fix the issue, reach out to Blomberg’s customer service or a qualified technician.
When to Call a Technician
While some errors can be fixed at home, others may require professional expertise. If you’re seeing recurring errors or suspect a major issue with internal components, it’s best to contact a licensed technician.
By understanding these error codes and following the steps above, you can prevent small issues from escalating into major problems and keep your Blomberg dishwasher running smoothly!