If your Amika dishwasher is displaying an error code, it’s trying to tell you something is wrong. This guide provides a clear explanation of common error codes and offers practical steps to troubleshoot and fix the problem.
Understanding Amika Dishwasher Error Codes
Error codes are diagnostic tools that help you identify issues with your dishwasher. Follow the steps below to resolve common problems, or contact a professional if necessary.
Amika Dishwasher Error Codes (Partial List)
| Error Code | Description | Possible Solutions |
|---|---|---|
| E01 | Water Inlet Error | Check if the water supply is turned on, inspect the inlet hose for kinks, and clean the inlet valve filter. |
| E02 | Heating Element Error | Inspect the heating element for damage, check for loose wiring, and ensure proper electrical connections. |
| E03 | Drain Error | Clean the drain filter, check for clogs in the drain hose, and ensure the drain pump is functioning properly. |
| E04 | Water Leak Detected | Inspect for visible leaks, check the door seal, and ensure hoses are securely connected. |
| E05 | Overfill Error | Check the float switch for obstructions, inspect the water inlet valve, and reset the dishwasher. |
| E06 | Water Temperature Error | Ensure the hot water supply is adequate, inspect the thermostat, and verify heating element functionality. |
| E07 | Detergent Dispenser Error | Check if the dispenser is clogged, ensure it’s not jammed, and verify the control board signals are correct. |
| E08 | Spray Arm Blockage | Remove and clean the spray arms, ensure they spin freely, and check for obstructions in the water jets. |
| E09 | Filtration System Fault | Clean the filters thoroughly, check for debris blocking water flow, and ensure proper filter installation. |
| E10 | Pump Motor Error | Inspect the pump motor for damage, check for loose connections, and ensure the impeller moves freely. |
| E11 | Door Lock Mechanism Error | Verify the door latch is closing properly, inspect the door switch, and check wiring for continuity. |
| E12 | Water Pressure Sensor Error | Clean the pressure sensor, ensure no clogs in related hoses, and verify sensor connections. |
| E13 | Control Panel Communication Error | Reset the dishwasher, check control board wiring, and inspect for damaged circuits. |
| E14 | Inlet Hose Connection Error | Ensure the inlet hose is securely connected, inspect for leaks, and check for blockages. |
| E15 | Rinse Aid Dispenser Error | Clean the dispenser, check for clogs, and ensure it’s properly filled and functioning. |
| E16 | Drying System Fault | Inspect the drying fan, verify heating element operation, and check for blocked air vents. |
| E17 | Timer Control Error | Reset the dishwasher, check the timer mechanism, and inspect control board connections. |
| E18 | Water Filtration Error | Clean or replace the water filter, inspect for blockages, and ensure proper filter installation. |
| E19 | Spray Arm Calibration Error | Realign or recalibrate the spray arms, ensure proper water flow, and check for mechanical faults. |
| E20 | Detergent Dispenser Calibration Error | Recalibrate the dispenser, ensure it’s not obstructed, and verify control board functionality. |
Important Notes:
- This is NOT an exhaustive list. Other error codes may be specific to your Amika dishwasher model.
- Error code meanings can vary slightly between models. Always refer to your user manual for accurate information.
What You Should Do:
- Find Your User Manual: Use your model number, visit the Amika website, or contact Amika support to locate your manual.
- Check for a Tech Sheet: A detailed “tech sheet” with error codes may be inside the dishwasher, often behind a panel. Access may require disassembly.
- Contact Amika or a Certified Technician: If unsure, reach out to Amika support or a qualified technician for assistance.
When to Call a Professional
If you’ve tried these steps and the error code remains unresolved, it’s time to call a professional for help. Attempting to repair advanced issues without proper expertise might risk further damage.
Additional Tips
- Regular Maintenance: Clean the filter and spray arms every few months to prevent buildup.
- Use Recommended Detergents: Avoid issues by using detergents and rinse aids recommended by the manufacturer.
- Check the Manual: Always refer to the user manual for specific instructions tailored to your dishwasher model.
By understanding Amika dishwasher error codes and troubleshooting the issues, you can ensure your appliance stays in top shape and works efficiently for years to come.