If your Amana dishwasher displays an error code, it’s trying to tell you something specific about what’s not working properly. Understanding these codes can save time and help you decide whether the issue requires a quick fix or professional assistance. Below, you’ll find a guide to the most common Amana dishwasher error codes and what they mean.
Amana Dishwasher Error Codes & Flashing Light Errors
| Error Code / Flashing Light Pattern | Description | Solution |
|---|---|---|
| E1 | Water flow issue | Check water supply, clean filters. |
| F4E3 | Circulation pump failure | Inspect and replace pump if faulty. |
| F6E1 | Water inlet error | Ensure proper water flow, clear blockages. |
| F8E4 | Diverter valve issue | Inspect valve for blockages or damage. |
| H2O | Low water supply | Check water pressure and supply connection. |
| 1-1 (1 Flash, Pause, 1 Flash) | Door switch problem | Ensure door is closed properly, inspect latch. |
| 6-1 (6 Flashes, Pause, 1 Flash) | Water inlet valve issue | Verify water supply, clean inlet valve. |
| 8-1 (8 Flashes, Pause, 1 Flash) | Drain pump problem | Check for drain blockages, inspect pump. |
| 8-4 (8 Flashes, Pause, 4 Flashes) | Wash motor failure | Test and replace motor if defective. |
| All Lights Flashing | System error detected | Run diagnostic cycle, reset dishwasher. |
General Troubleshooting Tips
Before calling for professional help, try these general steps to troubleshoot any error code:
- Perform a Reset:
- Turn the dishwasher off and unplug it from the power source for 5–10 minutes. Plug it back in and restart the machine to see if the issue resolves itself.
- Consult the Manual:
- Your Amana dishwasher manual often contains helpful troubleshooting steps specific to your model.
- Inspect for Obstructions:
- Check for any visible blockages in the filter, spray arms, or hoses.