Encountering an error code on your Frigidaire Gallery dishwasher can be frustrating, but don’t worry you’re in the right place! This guide will help you understand what those error codes mean and walk you through simple, actionable steps to get things back on track.
By the end of this guide, you’ll feel confident in troubleshooting your dishwasher’s issues.
Frigidaire Gallery Dishwasher Error Codes and How to Fix Them
| Category | Error Code | Problem | Fix |
|---|---|---|---|
| Power and Electrical | PF | Power Failure (10% or more power drop) | Check voltage, reset dishwasher by turning off power for five minutes or pressing cancel button |
| Power and Electrical | CE | Configuration Error or Wiring Issue | Check wiring connections between keypad and main control board, ensure correct parts are installed |
| Power and Electrical | iC0 | Electronic Control System Failure | Press cancel button or turn off power for five minutes, troubleshoot electrical system or call a professional |
| Water Supply | i10 | Low Water Level | Ensure water supply valve is fully open, check inlet hose for kinks, inspect water inlet valve |
| Water Supply | i20/i40/iF0 | Drainage Issue | Check drain hose for kinks, clean filters and sump area, remove knockout plug in garbage disposal |
| Water Supply | i30 | Leak Detected | Clean pressure sensor, check water inlet valve and drain pump, ensure dishwasher is level |
| Water Supply | i60 | Water Heating Issue | Reset dishwasher, check heating element and thermostat, verify hot water supply temperature |
| Water Supply | HO | Water Heating Delay | Run hot water in sink before starting dishwasher, troubleshoot water heating system |
| Rinse Aid | LO | Low Rinse Aid | Refill rinse aid dispenser |
| Rinse Aid | rA | Rinse Aid Switch Failure | Refill rinse aid dispenser, check wiring, replace main control board if necessary |
| Rinse Aid | RE/RF | Rinse Aid Reed Switch Issue | Refill rinse aid dispenser, replace dispenser assembly if error persists |
| Door | CL | Close Door Error | Ensure door is fully closed, check door switches and wiring, replace control board if necessary |
| Vent | UO | Vent Open Error | Check wiring between vent assembly and control board, replace vent assembly or control board |
| Vent | UF | Vent Fan Error | Check vent assembly and wiring, replace vent fan or control board |
| Motor and Sensor | i50 | Drain or Wash Motor Error | Reset dishwasher, troubleshoot drain and/or wash motor |
| Motor and Sensor | hs | Hall Sensor Error | Check motor and control board wiring, replace motor or control board |
| Motor and Sensor | tu | Turbidity Sensor Failure | Check sensor wiring, replace turbidity sensor |
| Control Panel | ER | Button Stuck or Membrane Switch Failure | Press all buttons, inspect control panel wiring, replace touchpad or control board |
| Relay Test | dP | Drain Pump Activation | No immediate action required unless error persists |
| Relay Test | FL | Water Valve Activation | No immediate action required unless error persists |
| Relay Test | rt | Relay/Triac Test Started | No action required unless test does not complete |
| Relay Test | Sd | Detergent Dispenser Activation | No action required unless error persists |
| Relay Test | UL | UL Test Activated | No action required unless error persists |