Maytag Dishwasher Error Code E4 F8: What It Means and How to Fix It
Few things are as frustrating as running your dishwasher only to have it stop midway through and flash an error code. If your Maytag dishwasher displays the E4 F8 error code, rest assured that you are not alone, and fortunately, this isn’t as cryptic as it may seem.
The friendly guide below explains what this error means and-more importantly-how you can fix it without breaking a sweat or breaking your dishwasher.
What’s the E4 F8 Error Code?
The E4 F8 code on a Maytag dishwasher generally signals an issue related to water flow or draining. That is, it tries to communicate that something has gone wrong in the balance of water coming in or going out of the machine.
Think of it this way: your dishwasher is set up to maintain just the right amount of water cycling through a wash cycle. Too much, too little-it just can’t get the job done. This error code is its way of telling you it needs a little TLC.
Common Causes of Error:
Clogged Drain or Filter Sometimes, food particles or debris block the drain or filter, because, let’s face it, none of us rinse as thoroughly as we probably should.
Kinked or Blocked Drain Hose A kinked or blocked hose could prevent water from circulating properly.
Faulty Water Level Sensor If the water level sensor is incorrect about the amount of water inside, it can upset the way a dishwasher works.
Insufficient Water Supply
When the water pressure entering higher to the machine is too low, that can be the cause of this error, too.
Is your Maytag Dishwasher saying E4 F8 here is how to fix it
Now that we know what can cause the error, let us roll up our sleeves and fix it.
Step 1: Check the Drain for Blockages
Remove the bottom dish rack to access the drain at the base of your dishwasher. Check the drain for bits of food, shards of glass, or anything else that could be jammed. Clean the filter in warm, soapy water to ensure that it is clear and will flow freely.
Step 2: Check the Drain Hose
The drain hose is usually located at the back of the dishwasher. Check for bends, kinks, or blockages that may impede the water flow. Straighten the kink or remove the hose and flush it with water to remove any blockages.
Step 3: Check the Water Supply
If you suspect low water pressure, check if the valve supplying your dishwasher with water is opened fully. Check the inlet for any dirt or other debris that can be obstructing the water flow.
Step 4: Reset the Dishwasher
Do the above, then restart your machine. Unplug the dishwasher, or at the circuit breaker, flip the breaker off to the dishwasher for about 5 minutes, then plug it back in or turn that breaker on. This will reset the system and might clear the error code if the problem has been fixed.
When to Call a Professional
If all of these troubleshooting steps have been gone through and the E4 F8 error code still is bothering you, it’s about time you brought in the pros. It might be that a bad water sensor, pump, or other mechanical problem that calls for expertise will involve the problem.
Lastly, don’t get anxious! Appliances are like children, all fussy and erratic at times, but more often than not, they will resolve with some patience and skills.
Avoiding Future Error Codes
Nobody’s a fan of an error code encore performance right in the middle of cleaning up after dinner. Ways to prevent issues such as E4 F8 from happening in the future include:
Rinsing Heavily Used Dishes This dishwasher is an excellent heavy lifter; however, it does help to make the process easier by rinsing huge chunks of food off to avoid clogging the drains.
Cleaning Filter Regularly: Make it a habit to wash it every month-out. Setting your phone for reminder purposes can perhaps be the ideal thing.
Check the drain hose from time to time; try to ensure whether the hose isn’t canted or obstructed.
Wrapping Up
The E4 F8 code on your Maytag dishwasher can be a headache, but many times, fixing it is as simple as giving your machine a little maintenance.
Have other questions or tips for troubleshooting dishwashers? Share them below we’d love to hear from you! And if your dishwasher is back to running smoothly, go ahead and put your feet up. Your sparkling clean dishes will be there waiting.