Belling dishwashers are designed to make your life easier, but occasionally, a small hiccup might disrupt their performance. Error codes on your dishwasher provide valuable insights that can help you quickly identify and resolve the issue. Here’s a straightforward guide to help you understand and fix common Belling dishwasher error codes.
Belling Dishwasher Error Codes & Solutions
| Error Code | Meaning | Possible Causes | Detailed Solution |
|---|---|---|---|
| E1 | Water inlet issue | Low water pressure, clogged inlet hose, faulty water valve | Ensure the water supply is turned on fully. Check for kinks in the inlet hose and clean any debris from the filter. If the issue persists, the water inlet valve may need replacement. |
| E2 | Draining failure | Blocked drain hose, clogged filter, faulty drain pump | Check and clean the drain filter. Inspect the drain hose for kinks or blockages. If water is still not draining, test the drain pump and replace it if defective. |
| E3 | Heating failure | Faulty heating element, thermostat issue | Ensure power is reaching the heating element. Test the thermostat and heating element with a multimeter and replace them if faulty. |
| E4 | Overflow or water leakage | Leak in hoses, excess detergent causing overflow | Turn off the dishwasher and check for water leaks in the hoses. Ensure you’re using the correct detergent. If necessary, inspect the float switch and replace it. |
| E5 | Water temperature sensor fault | Faulty thermistor (temperature sensor) | Locate the thermistor and test it with a multimeter. If it shows no continuity, replace it with a compatible part. |
| E6 | Door lock error | Door not closing properly, faulty door latch | Ensure the door is fully closed. Inspect the door latch for damage and replace it if it does not engage properly. |
| E7 | Turbidity sensor issue | Faulty or dirty sensor | Remove and clean the turbidity sensor using warm water and vinegar. If the problem persists, replace the sensor. |
| E8 | Spray arm malfunction | Blocked or misaligned spray arms | Check the spray arms for clogs and clean them with warm water. Ensure they spin freely and are properly attached. |
| E9 | Drying fan failure | Malfunctioning drying fan | Inspect the fan motor for blockages. Test the fan with a multimeter and replace it if not working properly. |