A blinking error code on your Maidaid dishwasher can bring your kitchen routine to a screeching halt. But before you resign yourself to hand-washing, take a deep breath. The following guide will empower you to diagnose and probably fix the problem yourself, saving you time and money. We’ll decode common Maidaid error codes and provide practical solutions to get your dishwasher running smoothly again.
Maidaid Dishwasher Error Codes and Solutions
| Error Code | Description | Causes | Solution |
|---|---|---|---|
| 01 | Water level not reached within time | Incorrect hydraulic connections, closed water tap, or overflow present | Check the hydraulic connections, open the water tap, and remove the overflow |
| 02 | Water drainage anomaly | Overflow removed, drain tube bent or crushed, or filters clogged | Check the overflow, drain tube, and filters |
| 03 | Boiler temperature reset anomaly | Boiler temperature reset not occurred within time limits | Turn the machine off and then back on |
| 04 | Water filling anomaly | Incorrect plumbing connections, closed water supply cock, or overflow present | Check the plumbing connections, open the water supply cock, and remove the overflow |
| 05 | Tub thermometer anomaly (probe open) | Machine not measuring temperature in the tub | Contact a technical assistance center |
| 06 | Boiler thermometer anomaly (probe open) | Machine not measuring temperature in the boiler | Contact a technical assistance center |
| 07 | Tub thermometer anomaly (probe shorted out) | Machine not measuring temperature in the tub | Contact a technical assistance center |
| 08 | Boiler thermometer anomaly (probe shorted out) | Machine not measuring temperature in the boiler | Contact a technical assistance center |
| 09 | Boiler loading time out: boiler not filled | Rinse cycle impossible | Check that the water tap is open and run a new complete cycle |
| ESF | Electro-mechanical safety device | Boiler or tub safety thermostats cut in, or tub safety pressure switch triggered | Contact a technical assistance center |
| ESL | Incorrect tub level | Tub pressure switch detected too much or too little water in the tub | Contact a technical assistance center |
| E22 | Tub heating time out | Washing water heating error | Switch the dishwasher off and then on again |
Additional Tips for Resolving Error Codes
- Reset the Dishwasher: Sometimes, a simple reset can resolve minor issues. To reset the machine, turn it off, unplug it for a few minutes, then plug it back in and restart it.
- Refer to the Manufacturer’s Manual: Your Maidaid dishwasher manual will have specific troubleshooting steps tailored to your model.
- Contact Professional Support: If the issue persists after trying the above steps, it’s best to reach out to Maidaid’s customer service or a certified technician for further assistance.
Additional Tips:
- Regular Maintenance: Clean the filters, spray arms, and interior of the dishwasher regularly to prevent blockages and buildup that can cause errors.
- Proper Loading: Load dishes properly to ensure that water can circulate effectively and that items don’t obstruct the spray arms or other components.
- Use the Right Detergent: Use only dishwasher detergent recommended for your Maidaid dishwasher. Using the wrong detergent can cause sudsing problems or damage the appliance.
- Check for Leaks: Inspect the dishwasher regularly for leaks, which can indicate a problem with a seal, hose, or other component.
- Power Cycle: If your dishwasher displays an error code, try turning it off for a few minutes and then back on. This can sometimes reset the system and clear the error.
- Consult the Manual: Your Maidaid dishwasher’s manual will have a complete list of error codes and troubleshooting steps.
- Contact a Professional: If you’re unable to resolve the issue yourself, it’s best to contact a qualified technician for assistance.
By following these tips, you can help keep your Maidaid dishwasher running smoothly and avoid costly repairs.
