Beko dishwashers display error codes to help diagnose issues quickly. These codes typically consist of letters and numbers, and while they may vary slightly between models, the general meanings remain consistent. Always refer to your user manual for model-specific guidance. Below are common error codes, their meanings, and detailed troubleshooting steps.
Beko Dishwasher Error Codes & Solutions
| Error Code | Meaning | Possible Causes | Solutions |
|---|---|---|---|
| E01 / H1 | Water Inlet Fault | Issues with water supply, inlet valve, or hose | Check water supply, inspect inlet hose, clean inlet filter, test inlet valve |
| E02 / H2 | Drainage Fault | Clogged drain hose, dirty filters, faulty pump | Clean filters, check drain hose, inspect drain pump |
| E03 / H3 | Heating Fault | Faulty heating element or thermostat | Check heating element, inspect thermostat, control board issue |
| E04 / H4 | Overflow/Leakage Fault | Water overflow, faulty inlet valve, leaks | Inspect for leaks, check water level sensor, verify inlet valve |
| E05 / H5 | Motor Fault | Issues with wash motor | Check motor connections, test motor, inspect control module |
| E06 / H6 | Pressure Switch Fault | Faulty pressure switch, clogged air chamber | Clean air chamber, test pressure switch |
| E07 / H7 | Turbidity Sensor Fault | Sensor malfunction, dirty sensor | Clean sensor, replace if needed |
| E08 / H8 | Diverter Valve Fault | Stuck or defective diverter valve | Inspect valve, test for power, replace if faulty |
| E09 / H9 | Water Softener Fault | Issue with water softener unit | Check salt level, inspect valve |
| E10 / HA | Circulation Pump Fault | Faulty circulation pump | Inspect pump, check electrical connections, replace pump |
Preventative Maintenance Tips
Keeping your dishwasher in its best condition can minimize the chance of encountering error codes:
- Clean the filter regularly: Remove food debris to prevent clogs.
- Inspect hoses periodically: Check for any damage or blockages in the inlet and drain hoses.
- Run maintenance cycles: Use dishwasher cleaning aids to remove limescale and grease buildup.
- Follow loading guidelines: Avoid overloading the dishwasher, and ensure proper placement of dishes for optimal performance.
(Note: The “F” codes or the “H” codes might be specific to certain Beko models. Your manual is crucial to confirm.)
Important Notes:
- Model Variations: Beko makes various dishwasher models, and error code systems can vary. Always consult your user manual.
- Flashing Lights/Symbols: Some Beko dishwashers may use flashing lights or symbols. Your manual will explain this.
- Regional Differences: Beko dishwashers sold in different regions might have slightly different error code systems.
- Resetting: Turning off the power at the breaker for a few minutes can sometimes reset the control board.
Where to Find the Definitive Information:
- Your User Manual: This is the most important resource. It will have the exact error codes for your specific model. If you don’t have it, try searching online for “[your Beko dishwasher model number] user manual.”
- Beko Website: The official Beko website for your region might have some troubleshooting information, but the manual is usually more detailed.
- Appliance Repair Websites: While these can be helpful, always double-check the information against your user manual to ensure it’s accurate for your model.
If the error persists after basic troubleshooting, please contact a qualified appliance repair technician.